Foamtec 70

Description

Foamtec70 is the biggest model in the range of machines working with Santoemma patented Foamtec system. This machine allows to completely clean and sanitize public restrooms, by spraying foam, rinsing and vacuuming. Foamtec70 is indicated for big areas.

The cleaning process is carried out through four stages:

  1. Spraying of foam on all the surfaces to be cleaned (walls, sanitary fixtures and panes),
  2. Foam chemical action
  3. Rinsing with fresh water,
  4. Vacuuming of residual water from floor
 

Places where Foamtec70 can be used:

Foamtec70 can be used for large areas, such as: :

  • Factories
  • Exhibition halls
  • Stadiums, arenas
  • Airports, railways stations
  • Any other big restroom open to public.

 

The 10 advantages of Foamtec system

Santoemma patented Foamtec system is the best solution to the problem of cleaning and sanitizing even very dirty restrooms, with several advantages on any other cleaning system:

 
  1. Better cleaning and sanitising result: foam does not immediately fall onto the floor, but stays on the surfaces where it has been sprayed for some minutes. The foam prolonged action assures to make the most of the cleaning effect of the product, ensuring both cleaning and sanitizing effect.
  2. Visual effect of foam: foam covers in white all the surfaces where it is sprayed such as walls, sinks, fixtures. The operator can therefore check that every corner has been covered, for a complete action in every point.
  3. The greatest hygienic safety for the worker, who does not come in contact with the surfaces and the objects to be cleaned and who does not get wet by the bouncing water, because rinsing is done with low pressure.
  4. Reduced labour for the worker: manual work is reduced to a minimum since the dirt is removed by the chemical action of foam and the mechanical action of rinsing.
  5. This system, more comfortable and hygienic, gives a greater fulfilment to the worker.
  6. Saving of time: while foam acts on the surfaces where it has already been sprayed, the worker is free to operate on other surfaces. Therefore, even a big room can be completely cleaned quickly and with no idle time.
  7. Detergent saving: the chemical is used without waste because it does not immediately fall onto the floor.
  8. Reduced power consumption: the machine requires little electrical power and therefore it can be used in any places.
  9. Reduced water consumption: the system foam + rinse at low pressure requires a minimal quantity of water. This avoids the flood of rooms, allows a longer working autonomy and offers the immediate availability of the rooms that have been cleaned.
  10. The machine can be used also in places with no drains because it can completely vacuum the water remaining on the floor after rinsing.

Other features of Foamtec70

 
  1. Filling with fresh water is done by connecting the machine directly to the tap. When completed, filling is stopped by a floater, located in the water tank.
  2. Dirty water is drained easily thanks to a sufficiently long hose. 
  3. The control/regulation panel is handy and the controls are simple and intuitive. The instructions for the use of the machines are written also on the control panel, as a useful reminder for the worker. 
  4. Switching from foaming to rinsing is very easy, rotating the proper levers situated on the control panel.
  5. By acting on the control panel it is also possible to control very easily the density of foam.
  6. All the accessories for cleaning and finishing are placed on the machine, so they can be easily used and carried.
  7. With optional tools, Foamtec70 can be used as an injection-extraction machine as well.

 

 

 

 
Technical Data of Foamtec70

Recovery tank capacity:

70 liters

Clean water tank capacity:

70 liters

Tank construction:

High density polyethylene

Vacuum motor:
Power:
Maximum waterlift:
Maximum air-flow:

2 x 2 stages
2 x 1000 W
2200 mm H2O
100 l/sec.

Pump with by-pass:
Power:
Max. Pressure:
Maxi Water-flow:

Piston type, with adjustable pressure
180 W
28 bar
4 l/min .

Approximate performances and consumption: (room with 120 sq. meters + 20 sanitary fixtures)

Time: 25 minutes
Detergent consumption: 1200 grams
Water consumption: 70 litres
Defoamer consumption: max 70 grams

Chemical dilution:

Pre-set around 4%

Cable length:

10 m

Weight (machine body):

95 kg

Weight ( packaged machine):

120Kg

Dimensions:

50 x 89 x 115 cm

Package dimensions:

65 x 102 x 130 cm

Spray hose/Vacuum hose length:

10/7,5 m

Standard colors:

Blue

Standard accessories supplied with the machine:

Foam/rinse gun, vacuum tool,
floor wiper with extension, fleece, pane wiper,
tool for vacuuming while rinsing, blower hose.

 

Complete machine with all standard accessories and
2 tanks of cleaning & sanitising chemical SANI-FOAM + 1 bottle of defoamer ANTIFOAM